Non-Woven Isolation Gown

The non-woven material used in our isolation gowns is familiar to all medical workers meaning there is no retraining required in the use of this product.
Intended for use by medical personnel when expected risk of exposure to fluid is LOW to Medium
Recommended for: Labs and Pathology and nursery.
Impervious to liquids and bodily fluids.


Material:         Non-Woven (45 GSM)
Color:             Blue
Dimension:    780x1200mm
Packing:         50pcs folded per stack in polybag
Carton Size:   39x33x25cm
GW (carton):  8.45kg
Qty/carton:    100 pcs
MOQ:              20,000 pcs
Certification: CE, AAMI PB70 Level 3, ISO 13485:2016

For customers who require the gowns to be sterile, individual packaging and sterilization process is available


The ANSI/AAMI PB70 standard includes four standard tests to evaluate the barrier effectiveness of surgical gowns, isolation gowns, and surgical drapes. Based on the results of these standardized tests, four levels of barrier performance are defined, with Level 1 being the lowest level of protection, and Level 4 being the highest level of protection. Table 3 summarizes the requirements of ANSI/AAMI PB70:2012 regarding the classification of barrier performance of surgical gowns, isolation gowns, and surgical drapes.

ANSI/AAMI PB 70:12 classification of barrier performance of surgical gowns, other protective apparel, surgical drapes and drape accessories

As indicated in the above table, the requirements for levels 1, 2, and 3 have specific test requirements associated with them. Only Level 4 gowns are tested for viral penetration resistance, and therefore only Level 4 garments are considered impermeable to viral penetration using ASTM F1671. The gowns complying with the lower levels (Level 1, 2, and 3) cannot be considered impermeable. However, Level 1–3 gowns can provide increasing resistance to liquids.
ANSI/AAMI PB70 Level 1, 2, and 3 surgical/isolation gown-testing requirements only use water as a challenge. Because the surface tension of water is much higher than that of blood, blood can penetrate through fabrics more readily than water. Therefore, no correlation can be made between AATCC water resistance tests (AATCC 42 and AATCC 127) and ASTM F1671 viral penetration tests, and consequently, protection provided by Levels 1, 2, 3 gowns and that of Level 4 gowns. A common misunderstanding among many end-users is that they are protected from blood, body fluids, and other potentially infectious materials (OPIM) when they wear any type of fluid-resistant garment or surgical or isolation gown.




Quote now